Tiered Tray DIY Repurposed Enamelware

I’m back with my first tiered tray. As mentioned in my previous post, I’m working to clear out old before bringing in new. I would like to use as many of my gathered pieces as possible, so you may be seeing several small projects over the next two months and occasional tag sales at my home to help achieve my goal.

To get started, a collection of three worn enamelware pans were taken to the drill press and 5/16″ holes drilled through their centers. The enamel coating will chip away during drilling. I applied a coat of clear fingernail polish around the drilled holes and any chipped edges of the enamel to prevent any further chipping. A clear sealer could be used for this step too. After the fingernail polish was dry, the enamelware was waxed and buffed.

I chose two decorative spindles to use as spacers between the pans. I thought their design worked well, they already had center holes in one end, and one already had a finial; perfect. After cutting them to the lengths desired, they went to the drill press and a hole was drilled through the length of them using the original hole as a guide. They were sanded, painted, and sealed.

A piece of 5/16″ threaded rod was cut to the length needed and a washer and nut found to fit it.

The pieces were slipped on the rod, working from the top down and secured with the washer and nut.

I thought it was finished at this point, but after looking at for a week, I had to add one more detail; a wire ring at the top.

With bolt cutters, a circle was cut from a steel bedspring; sanded, painted, sealed. The tray was taken apart and the finial drilled through at the drill press. The steel ring was almost unbudgeable. I had to hold the finial while my husband stretched the ring enough to get it the holes; its a tight fit.

The tray was reassembled and done! I have my first item for a future tag sale!

Please like, comment, and share as you wish. Keep recycling, repurposing, and upcycling, each small step helps.

2 thoughts on “Tiered Tray DIY Repurposed Enamelware

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s