We are blessed! 2018 finds my family all healthy and happy. Although we are all still temporarily under one roof, it’s an exciting time. Many remodeling plans were slowed or halted by frigid winter weather, but now, everyone’s plans and projects are ready to move forward again. For some, there’s career advancements on the horizon, and for me, a little more free time to do what I like best; make stuff, and go gather things to make more stuff.
With more free time also comes the opportunity for me to lay claim to the old chicken shed behind our house. It has served as storage and even an extra pet kennel when needed, but now it’s vacant. I’ve long yearned for a space to store found treasures and set up a small shop to sell my wares, maybe host some garden art classes. I’m still kicking some ideas around, but after repairs and a hot power washing, I’d like to have something going in the very near future.
My sister has recently retired. Like me, she enjoys a good hunt and repurposing her finds too. We’re looking forward to meeting a bunch of fun, like minded people on June 2nd when we participate in the 6th Annual Back Roads Vintage Market in Dysart, Iowa. I’ve often heard good things about this event, but have never been free to go. The pictures shared on their Facebook page are impressive, can’t wait to get there. https://www.facebook.com/BackRoadsVintageMarket/
Thinking of wares, and with the market only 3 months away, I needed to kick it in gear and get busy. I took a poke around my garage to see what could be started right away. Holy Cow, there’s a lot out there. I was happy to find quite a few things I already had a plan for. Yep, one was the console table, a perfect upcycle piece. It was purchased at Hobby Lobby originally. It held a pencil lamp behind our living room couch for several years, but wasn’t much good for anything else because it tipped easily. It was moved out over a year ago when the kids needed more room to play.
If you’re a Facebook follower, you’ll know I’ve been working on the table, in spurts, for the last couple of weeks. Basically, it was just flipped end for end, making the top the bottom, and the bottom the top. It could have gone together much quicker, but, well, you know, life’s little interruptions. I’ll need to start working more diligently though. I hope you stay tuned, I think you’ll like some of the projects that will be coming.
I replenished my favorite Stowe White paint at Lowe’s recently, and found a few new Valspar colors I thought would work well together. The small 8 oz size paints are perfect for projects like this.
The original size of the table was 33″T x 35″W x 9 3/4″D.
Two pieces of 1″ pine were cut for a new top and bottom, each 36″L x 11 1/4″W. Sanded smooth.
Three screws holding the metal table top were removed. The screws were too short to be used again. The metal top was centered on one of the boards, flush on the back edge. Holes were drilled down through the existing screw holes, through the metal and into the wood. Flip the metal top over so the finished side is up. Check to see if the holes line up nicely, if not make adjustments. This stacked piece will be the base of the table when finished.
All surfaces of the boards were brushed very lightly with streaks of Granite Dust, Gravity, and Stowe White in a random pattern. Let dry completely, repeat. Let dry completely again, then sand to see the grain. Wipe with a tacky cloth to remove any dust before staining with a Dark Walnut wood stain. Let dry overnight. To finish, following the directions on the can, wipe on two light coats of low gloss Tung Oil Finish. Dry completely.
Four corner, or “L” brackets, will be needed to attach the new top board to the legs. There are fancy ones available but I used ones I had.
A slot was marked on the inside of the legs, on each end of the table, to accommodate a 1/2″ wide bracket. Cut the metal with a cutting wheel on a die grinder. Position the brackets so the tops are flush the the top of the legs, screw into place.
The metal table frame was painted with two coats of Brisk Olive green paint, drying completely between coats. Distress the edges by rubbing the paint off with a dampened cloth.
Position gliders and nail them into place on the bottom of the base board. If needed, clip the end of the nails so they don’t protrude through the wood.
To add weight, scrap plywood pieces were glued on the underside of the metal top. Weighted down and dried overnight.
On an even surface, stack the base board, weighted metal table top piece, and the upturned green table frame. Line up the pre-drilled holes and screw solidly into place. I used small washers on 1 1/4″ wood screws. The tips were cut off of the screws so they wouldn’t protrude.
Turn the table base over and center it on the newly finished top board. Keep the back flush like the base. Mark the bracket holes. Drill starter holes before screwing into place, again, making sure the screws don’t protrude through the top.
And, there we go. Finished and ready for a new home. I really like how this shade of green looks with the dark stain. But then again, I like almost anything green. I’m sure you’ll be seeing this color again real soon.